Hi Guys,
Looking for some advice here.
I am going to fit a MSD 8728 Soft Touch Rev Limiter to my Bosch HEI distributor and obviously want to get it right the first time!
The last thing I want to have to do is get it together and have to pull the dizzy to mess with the wiring.
Looking at the instructions, there is a diagram for a points dizzy, as well as a few others.
The three that I feel would be most relevant are as follows:
Points ignition
Points.png 59.68K 4 downloads
Chev HEI with magnetic pickup
Magnetic.png 68.79K 2 downloads
Chev HEI (Coil in cap)
Chev HEI.png 68.78K 2 downloads
Do I just wire it as you would for a points dizzy, or do I need to tee off the wiring inside the internal ignition module?
Cheers,
Dave