Hey guys, long time no see.
I occasionally pop to have a look to see what everyone is up to. Great to see old and new projects.
So I'm making an LX roof skin from scratch which needs to be "finish wheeled" front and back sections, canter rails need to be completed (Bent to correct angle and shrunk at front and back sections). The canter rails 90 degree bends I've left till the end as there needs to be (from memory) a 90 degree bend for the railing. So I cant do this bend or it will lock the canter rail in place.
Rear section needs shrinking to get get the correct curve, front section needs a recess for the front window to drop in.
Over all curve of the roof was ok till I bent down the rear section, the correct curve will come back when I shrink the rear section as mentioned previously.
Question is, how does the front section attach to the front pillars? I have an LX shell I normally copy off but I don't want to tear it apart.
Has anyone got pics of how it joins, cross section?
Thanks Guys. If moderators need to move this post to fabrication or something its all good.
Older pics, i thought they were more up to date. Ill post more later
200953748_3744205269017269_7295872503690128986_n.jpg 111.6K 13 downloads
223265554_925353638015787_5960069717056946655_n.jpg 124.4K 11 downloads
218346148_1789082351275177_4850839201026089468_n.jpg 124.77K 12 downloads
Edited by Bart, 18 September 2021 - 05:05 PM.