I was wondering if anyone could run a tape measure over there Lc and let me know the measurements that I have annotated in the attached picture.
These trims have been removed at some stage on my Lc and I'm planning on putting them back on. Ive purchased all the rivets just want to make sure they go back in the right place as the lugs have been ground off.
A1 & A2 = Measured as near to verticle as possible.
A3 = Measured along the length of the lip of the guard
Also if anyone know how many lugs there are securing the trim from the factory that would be helpful - 'if a jobs worth doing' and all that...
Thanks in Advance
Lc-Quarter-trims.jpg 258.98K 1 downloads
Edited by red6, 23 October 2015 - 10:19 PM.