Edited by Caustic, 14 January 2018 - 10:39 AM.
The LC 2 door... Quick lick and Flick
Started by
_Caustic_
, Jul 05 2016 12:02 AM
103 replies to this topic
#101 _Caustic_
Posted 14 January 2018 - 10:20 AM
Thanks Paul, This weeks project, is trying to fine tune my triples. Only have a couple of pictures with the engine complete,just need to get my head around the mechanical accelerator linkages.The two different pictures show the standard and alloy rocker cover.Perfer the alloy cover, but due to the roller rockers spurting oil directly at the pcv, i get a steady stream of smoke whilst crusing hence the stardard cover.Has anyone had any luck with the pcv breather combo off ebay, that will be my next purchase.cheers all
#102
Posted 14 January 2018 - 12:47 PM
Paint looks good Nice colour. Is that acrylic or 2 pack?
#103
Posted 15 January 2018 - 05:19 AM
The alloy covers generally need a thin plate attached under the PCV hole similar to the factory covers.
#104 _Caustic_
Posted 15 January 2018 - 07:05 PM
Hi all, the paint is acrylic with the clear blended into it on the final coats, i think thats what my friend said. I also need to fabricate that factory splash plate inside the alloy cover,then need to find someone to tig weld it into postion,a project for later on.The factory rocker cover works perfect.
Just clarify the rear sway bar post, i used the sway brackets off the vn diff and made my own angle brackets which connects the studs to the end of the sway bar.cheers
Just clarify the rear sway bar post, i used the sway brackets off the vn diff and made my own angle brackets which connects the studs to the end of the sway bar.cheers
Edited by Caustic, 15 January 2018 - 07:12 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users