My Bad, I missed the "FRONT" request
Prolly not much good to you due to the mods, but I'll list it all anyways.
My fronts are quite deep, 15x7, had to modify the centre to be able to weld it in the band, measures very close to 3" back space, tyres are 215-60-15.
Now the mods, HQ Drum Brake Spindles, UPC Hubs with VT Commodore Discs and R32 Calipers. The Pillar is clearanced lots and the camber is aggressive at -2.5Deg to get the tyres off the flare when it hits bumps, also has spaced upper balljoints for additional camber gain, but the tyres still touched until the extra camber was put on the front. Wheels should have been about 1/4" shallower dish at a guess.
Anyways, use that info if any of it is of help.