Agree with the glass.
Yeah that seems a little too much metal, 1/4 to a 1/3 of that would not be unusual.
That was just some of it.... There was more. Sounds like I have bigger dramas going on.
Posted 31 March 2018 - 06:17 PM
Agree with the glass.
Yeah that seems a little too much metal, 1/4 to a 1/3 of that would not be unusual.
Posted 31 March 2018 - 10:01 PM
Way too much metal. I am starting to think you have wiped a cam lobe.
Posted 31 March 2018 - 10:31 PM
Posted 01 April 2018 - 06:16 AM
Posted 01 April 2018 - 09:37 AM
Dead simple to tell with just the rocker cover off, throw a dial indicator on the end of the pushrods and compare the total lift of all the exhaust valves (to each other) and all the inlet valves as you turn the motor over.
You won't get the figure quoted in the cam specs (without a degree wheel) but you should be able to tell if one lobe in particular is gone?
Posted 01 April 2018 - 03:53 PM
ouch
Posted 17 April 2018 - 06:13 PM
Posted 18 April 2018 - 09:14 PM
0 members, 0 guests, 0 anonymous users