do high energy make sumps for 6 cylinder lj torana.
sumps
#1 _lawn bowls_
Posted 29 October 2018 - 01:43 AM
#2
Posted 29 October 2018 - 05:53 PM
#3 _LXT333_
Posted 29 October 2018 - 07:16 PM
Anyone ever straightened a sump?
Just bough an Aeroflow 308 sump and it’s rocks around on the block quite a bit
#4
Posted 30 October 2018 - 05:56 AM
#5
Posted 30 October 2018 - 06:22 AM
#6 _LXT333_
Posted 30 October 2018 - 08:02 PM
Didn’t think about the windage tray but it’s definately rocking as if twisted.
I will double check nothing is touching.
Was up the shed bolting it down without a gasket.
I’ll undo em later and see if it has straightened out.
Thought about torquing em down with a wedge or block under opposing sides and twisting is back the correct way.
Have ordered one of those one piece rubber gaskets with the steel insert.
Believe it helps from overtightening so likely better on twisted sumps so doesn’t overtighten and squish the gasket out.
#7
Posted 30 October 2018 - 09:23 PM
#8
Posted 31 October 2018 - 05:51 AM
#9
Posted 02 November 2018 - 11:31 PM
do high energy make sumps for 6 cylinder lj torana.
Should b plenty of good fabricators that could knock one up to suit your needs modifying your original sump.bigger capacity .baffled with more gates.
#10 _202 Corona_
Posted 23 January 2019 - 08:22 PM
Attached Files
#11
Posted 23 January 2019 - 10:42 PM
I have a theory
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users