LX V8 hatch under dash loom query
#1
Posted 10 December 2019 - 12:51 PM
I have the main plug that goes into the back of the dash in this picture I have a random wire that looks like it doesn't go anywhere it is this one that I am holding...
I thought that it went on the brown spade terminal on the back of the cluster but I have one further down the loom that I have labelled as brown on dash...
Can anybody tell me where this random female spade terminal May connect is there a possibility it is the cigarette lighter or something???
Thanks again guys appreciate it
#2
Posted 10 December 2019 - 12:54 PM
You got pics?
#3
Posted 10 December 2019 - 12:54 PM
Attached Files
#4
Posted 10 December 2019 - 12:59 PM
#5
Posted 10 December 2019 - 01:02 PM
Looks like your Tacho Wire.
#6
Posted 10 December 2019 - 01:10 PM
#7
Posted 10 December 2019 - 01:35 PM
It plugs onto the back of your tacho on your cluster. Have you got the LH Wiring Diagram that Ive uploaded a million times? Its the best you'll be able to get. And then nut the remainder out.
http://www.gmh-toran...wiring-diagram/
Edited by hanra, 10 December 2019 - 01:36 PM.
#8
Posted 10 December 2019 - 01:40 PM
Correct me if I'm wrong but if it's an SL cluster it won't have a techo? Cheers Ron
#9
Posted 10 December 2019 - 02:39 PM
#10
Posted 10 December 2019 - 03:43 PM
#11
Posted 10 December 2019 - 05:47 PM
Check it's not you ciggy lighter wire.
#12
Posted 10 December 2019 - 06:11 PM
#13
Posted 10 December 2019 - 06:37 PM
Voice to text deteriorated not 22 rated
#14
Posted 10 December 2019 - 07:28 PM
#15
Posted 11 December 2019 - 11:12 AM
You aren't wrong about that, but the looms don't change between the models.Correct me if I'm wrong but if it's an SL cluster it won't have a techo? Cheers Ron
You can install an 'SL/R' cluster straight into an 'S' model without adding any wires I'm quite sure.
#16
Posted 12 December 2019 - 06:15 AM
Attached Files
Edited by hanra, 12 December 2019 - 06:16 AM.
#17
Posted 13 December 2019 - 07:08 PM
hey hanra thanks for the diagram that is the clearest one that you have uploaded that i could find i had referred to it before asking the question in the first place but could not read or understand the diagram .. so thanks for the fresh one and also the pic you just supplied as that is the exact position of the one in the harness that i have..
do you have a pic of just a little further down the harness towards the pass side and know what the similar looking wire is?
wiring really does my head in if i am being honest so thank you guys for all the help so far..
#18
Posted 14 December 2019 - 10:48 AM
There is only one brown wire at the back of the cluster. It's for the Tacho.
#19
Posted 17 December 2019 - 06:01 PM
From memory the only wires going down that end of that part of the loom
Passenger door interior light - heater fan - glove box - cig lighter - radio
There may be wiring for a rear demister switch or elec aerial still in your loom?
If it is the tacho wire the other end will be Neg on the coil
Edited by Swarbs, 17 December 2019 - 06:05 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users