Just wondering if anyone has come across this before
Mc Cloud clutch - new bearing and Super T10 box
The prob i have is when the box is installed the thrust bearing at the rear end is against the input cover plate of the box
The front end is pushing against the fingers of the pressure plate
Only by about 2 - 3 mm but i was hoping for that in bearing free play while the clutch is disengaged
Plate is installed correctly
The only way out of this i can see is to source a "shorter" thrust bearing
Is there such a beastie Prob would need at least 6mm to take out the pressure it is putting on the fingers and also give me a bit of free play