el, ef thermo fans (fitting)
#1 _raceme_
Posted 07 February 2006 - 09:46 PM
#2 _MYLJ_
Posted 07 February 2006 - 10:07 PM
I've got a set of AU fans on the big block and would recommend them to anyone and everyone
best set up I've used so far.
Very easy to fit , I made some small angle brackets to atatch it to the sides of the raidiator were the factory fan shroud use to mount (trimmed the plastic down a bit on the shrouding for a snug fit) make sure you wiring is up to the task as they pull plenty of amps!
#3
Posted 07 February 2006 - 11:00 PM
#4 _MAWLER_
Posted 08 February 2006 - 05:05 PM
I just fitted some 3mm aluminium angle 20mm high along both sides and used the original holes in the rad and drilled through the al, attaching with a couple of bolts. Holds good o.
Cheers,
#5 _raceme_
Posted 08 February 2006 - 05:09 PM
i also forgot, i got a price to buy a new el thermo fan, $220 bucks, is this about right, it sounded pretty cheap to me for brand new ones
Edited by raceme, 08 February 2006 - 05:12 PM.
#6
Posted 08 February 2006 - 05:32 PM
#7 _Torana482HP_
Posted 08 February 2006 - 06:41 PM
#8 _raceme_
Posted 08 February 2006 - 09:40 PM
#9 _MAWLER_
Posted 09 February 2006 - 03:54 PM
I actually forgot to take photo's of my setup, I was running to a pretty tight schedule, but there are plenty of good pics in the other topic dattoman made a link for.
Cheers,
#10 _Torana482HP_
Posted 09 February 2006 - 04:25 PM
au fans are offset and el are level.
#11 _tj81_
Posted 09 February 2006 - 08:12 PM
#12 _raceme_
Posted 09 February 2006 - 08:48 PM
#13 _devilsadvocate_
Posted 09 February 2006 - 09:42 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users