Lower front panel LC LJ
#1 _les_
Posted 24 January 2008 - 07:39 PM
Les
#2
Posted 25 January 2008 - 12:21 AM
on a good note les i have been fitting one of your rubber kits to an LJ over the last week and so far all pieces are fitting great , seems much better than one i did 5 years ago !!!! keep up the good work ...
#3 _gtr-xu1_
Posted 25 January 2008 - 12:54 AM
#4 _les_
Posted 25 January 2008 - 07:46 AM
We already make a fibreglass one these are steelim hopeing these are steel not fiberglass
#5 _ljbob_
Posted 28 May 2008 - 05:04 PM
If so, has anyone fitted one up?
BoB
#6
Posted 28 May 2008 - 05:54 PM
Product code : 2806685
$151.80
#7 _ljbob_
Posted 29 May 2008 - 05:33 PM
BoB
#8
Posted 18 November 2008 - 10:36 AM
my car is now 95% repaired , but need to know if any
body has used the rare spare LJ lower valance yet ???? (steel one)
the one iam unpicking just wont do,looked nice to start with, but with the banging and
drilling it is almost as rusty as the one i want to replace!!!!
thanks johnno
#9
Posted 19 November 2008 - 07:38 AM
#10
Posted 19 November 2008 - 09:20 AM
i have asked for more pics.....still waiting for rares to send
#11
Posted 19 November 2008 - 10:24 AM
its from the blinker lights down and it curls back around
to meet up with bottom of raditor support.
going to buy one...
will report back once GTR161s welds it in
#12
Posted 31 January 2009 - 02:23 PM
some newness
well its on and it fits real good, Kev says he would use one again,only drama was when old front valance was removed the rear was so badly rusted, we used a 74 donor rear and used it to repair the bad bits on my 72 car, kev weld up the cut outs to to suit the 72 look
cheers johnno
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users