Jump to content


rear sway bar


  • Please log in to reply
9 replies to this topic

#1 _SLRLOVER_

_SLRLOVER_
  • Guests

Posted 26 March 2011 - 10:28 AM

I have a set of tubular trailing arms upper and lower for a banjo diff LH-LX and as the standard swaybar is fixed to the standard lower trailing arms and as there is no fixing points on the tubular arms what other swaybar options are available?

Edited by SLRLOVER, 26 March 2011 - 10:36 AM.


#2 ls2lxhatch

ls2lxhatch

  • Members
  • PipPipPipPipPipPipPip
  • 5,332 posts
  • Location:Perth
  • Car:LX Hatch
  • Joined: 29-May 06

Posted 26 March 2011 - 11:04 AM

If you have McDonald Bros tubular arms then they will fit the mounting points if required. You could also make a bracket that clamps around the tubular arms to suit the factory swaybar. The LH/LX factory swaybar is the least effective design but gives the best clearance for exhaust.

The UC stay swaybar design is more effective and requires a thinner swaybar. K-MAC and Whiteline make UC style rear swaybars. I prefer the link mount on the K-MAC swaybar. K-MAC also make a rear mount adjustable rear swaybar however you will probably find it gets in the way or you exhaust.

You will find pictures on my website.

I you decide on the K-MAC adjustable or Whiteline then I have those for sale. I used the K-MAC UC stay swaybar.

Edited by ls2lxhatch, 26 March 2011 - 11:05 AM.


#3 ls2lxhatch

ls2lxhatch

  • Members
  • PipPipPipPipPipPipPip
  • 5,332 posts
  • Location:Perth
  • Car:LX Hatch
  • Joined: 29-May 06

Posted 26 March 2011 - 11:22 AM

If you decide to use the LX swaybar then it is worth considering moving the mount points back around 10 mm to clear a 9". It would be best to trial fit and mark the position as there are many different housings.

#4 Toranamat69

Toranamat69

    Forum R&D Officer

  • Members
  • PipPipPipPipPip
  • 2,117 posts
  • Location:Brisbane
  • Joined: 07-November 05

Posted 26 March 2011 - 12:15 PM

Wish you were in Brissy Andy - I want to get one of the rear mount adjustable k-mac ones to change from the whiteline UC type I have. Probably not worth shipping it across the desert though.

I am probably too far from SLRlover for him to be interrested in mine either.

#5 adgjl7

adgjl7

    Forum Member

  • Members
  • PipPipPip
  • 82 posts
  • Location:central qld
  • Car:lx hatch
  • Joined: 12-May 08

Posted 28 March 2011 - 10:24 AM

If you have McDonald Bros tubular arms then they will fit the mounting points if required. You could also make a bracket that clamps around the tubular arms to suit the factory swaybar. The LH/LX factory swaybar is the least effective design but gives the best clearance for exhaust.

The UC stay swaybar design is more effective and requires a thinner swaybar. K-MAC and Whiteline make UC style rear swaybars. I prefer the link mount on the K-MAC swaybar. K-MAC also make a rear mount adjustable rear swaybar however you will probably find it gets in the way or you exhaust.

You will find pictures on my website.

I you decide on the K-MAC adjustable or Whiteline then I have those for sale. I used the K-MAC UC stay swaybar.

hi i was also looking at these sway bars but the dealer here cant tell me if they will fit on a nine inch diff in a lx torana wondering if you have tryed them or know thanks

#6 ls2lxhatch

ls2lxhatch

  • Members
  • PipPipPipPipPipPipPip
  • 5,332 posts
  • Location:Perth
  • Car:LX Hatch
  • Joined: 29-May 06

Posted 28 March 2011 - 02:40 PM

The are many different styles of 9" housings, the K-MAC and Whiteline UC style swaybars will fit with most if not all 9" housings. You need to measure the diameter of the axle tubes and order with u-bolts to suit.

Whiteline on 9"
Posted Image

K-MAC on 9"
Posted Image


From memory the K-MAC rear mount adjustable rear swaybar clears the 9". Worst case scenario you could fit spacers.

K-MAC rear mount adjustable on banjo.
Posted Image

#7 _rocket_

_rocket_
  • Guests

Posted 28 March 2011 - 02:57 PM

ls2lxhatch Well done mate, great info there.

#8 _SLRLOVER_

_SLRLOVER_
  • Guests

Posted 28 March 2011 - 03:31 PM

ls2lxhatch. thats the go. very helpful Thanks........

#9 adgjl7

adgjl7

    Forum Member

  • Members
  • PipPipPip
  • 82 posts
  • Location:central qld
  • Car:lx hatch
  • Joined: 12-May 08

Posted 29 March 2011 - 01:54 AM

thanks heaps

#10 _SLRLOVER_

_SLRLOVER_
  • Guests

Posted 29 March 2011 - 02:24 PM

K-mac here i come

Edited by SLRLOVER, 29 March 2011 - 02:30 PM.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users