Hi, I am replacing the hood lining on a LH torana. There are two holes where the heavy cross rods are located in the cant rail inner. Q1. does the rod go in the top or bottom hole and Q2 if it is bottom holes it there a clip that goes in the top hole to keep the rod located. I never removed the roof lining and have no idea about the clips and I cant find it in the manual I have. Can anyone assist with advice or photos. Regards Gary.
LH Hood lining
Started by
_Lost4words_
, Feb 05 2016 08:27 AM
3 replies to this topic
#1 _Lost4words_
Posted 05 February 2016 - 08:27 AM
#2
Posted 05 February 2016 - 01:07 PM
Believe there was a service bulletin that said the white tip rod was replaced by an orange tipped (or vice versa) and the rod should be in the upper. Best wait for confirmation from another.
#3 _alkemadea_
Posted 05 February 2016 - 02:41 PM
LH Manual shows it in the top hole. The rod colours mentioned in the manual in order of front to back are ...white, white, black(or natural), white and green. Service Bulletin may have changed this but dont have that. Hope this helps
Attached Files
#4
Posted 05 February 2016 - 07:37 PM
Here's the service bulletin. White was replaced by orange.
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users