I'm resided to the fact that I will probably never get my hands on a set of LC 82911 door trim / rear trim stainless steel retainers. The odd one turns up on eBay now and then and goes for a ridiculous amount of money, due to the old supply and demand issue.
I know the complexity of the bends of the front and back retainer trims have prevented these being re-produced to date, probably also the fact that there is a very limited market of LC GTR's and XU1's still needing these.
It looks a little incomplete and a little ugly without the stainless trims as below.
no trim 01.png 388.09K 4 downloads
no trim 02.png 387.46K 3 downloads
Has anyone come up with an alternative solution, even if it's only cosmetic? They seem to sit okay without the retainers.
Was searching for a chrome u channel trim and found this example. It will be of course only cosmetic and not screw to the door and hold the trim in place. It might look okay-ish if I can find a compatible size.
https://www.carbuild...-55mm-per-metre
Does anyone know how many mm of stainless trim hangs over the door card trim? I'm guessing it's about 8 or so mm.
trim example.png 370.9K 1 downloads