Recomended spark plug for a 2815843 head with electronic ignition ?
Started by
liswar2
, Feb 22 2021 09:04 AM
4 replies to this topic
#1
Posted 22 February 2021 - 09:04 AM
Hi,
Out of curiosity ,
What are plugs and gaps are people running with
Electronic ignition on their Xu-1 motors?
Thanks in advance
Wazza
Out of curiosity ,
What are plugs and gaps are people running with
Electronic ignition on their Xu-1 motors?
Thanks in advance
Wazza
#2
Posted 23 February 2021 - 05:27 AM
How much cylinder pressure do you have?
#3
Posted 23 February 2021 - 09:43 AM
Haven't done the 1st start up yet,
As the motor , box and driveshaft are going back in today,
This is a 2815843 head.
Then I'll take a few days to bolt on all the hanging fruit .
And bits and bobs.and wire it all up.
With my glasses on.
As the motor , box and driveshaft are going back in today,
This is a 2815843 head.
Then I'll take a few days to bolt on all the hanging fruit .
And bits and bobs.and wire it all up.
With my glasses on.
#4
Posted 23 February 2021 - 10:03 PM
10.8 :1 compression in mine, 264 [email protected] lift advertised duration camshaft being a one off from Clive Cams, Pertronix ignition and coil I use NGK BP7ES plugs @.025" gaps and have done for many years in my LJ XU1
Edited by caterham2, 23 February 2021 - 10:04 PM.
#5
Posted 24 February 2021 - 06:17 PM
Thanks,
Currently have
Champion RN9YCC in but these are points.
Have a set of 6champion gold N9YX
And a set of
6 Bosch Super W8DC RO 088
And a set of 6 NGK BPR6EFS 1.1,
Currently have
Champion RN9YCC in but these are points.
Have a set of 6champion gold N9YX
And a set of
6 Bosch Super W8DC RO 088
And a set of 6 NGK BPR6EFS 1.1,
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users