Hey guys thanks in advance for reading my issue
Couple years back I brought a loom kit that was purchased from v6 conversions (from a mate) its brand new with instruction books from micks4wd, but had v6conversions stickers all over it
I finally got around to putting the vt v8 engine in my hatch yesterday and having issues working out how the torana loom ties into v6conversions adapter loom
On the conversion loom there is 9 wires that are single and free(not in a plug) there there is a plug that plugs into a separate loom that connects to the body control modual simulator
The body control modulal simulator loom has several wires that a single and alone
Any one that has completed this conversion using v6conversions looms that could assist will be of great help
Look forward to assistance in getting my hatch back on the road
V6 conversions loom for vt304
Started by
_lx304hatch_
, Jun 11 2017 11:09 AM
4 replies to this topic
#1 _lx304hatch_
Posted 11 June 2017 - 11:09 AM
#2 _lx304hatch_
Posted 11 June 2017 - 12:03 PM
This is where the loom come from based on the instructions
http://www.marks4wd....s/mfk690vs.html
How ever it has v6conversions written all over it
So I presume this company buys from v6 conversions
http://www.marks4wd....s/mfk690vs.html
How ever it has v6conversions written all over it
So I presume this company buys from v6 conversions
#3 _lx304hatch_
#4 _lx304hatch_
Posted 11 June 2017 - 12:41 PM
Right hand side is where the body control simulator plugs in
Next to that is what I presume some how wires into the torana loom
Next to that is a 2 pin plug I'm not sure what for
Then far left is the fuse bar (presume I need to run a wire to the battery for)
Only have instructions for marks 4wd adapters and none from v6conversions so I'm guessing that's why this is so tricky to work out
Next to that is what I presume some how wires into the torana loom
Next to that is a 2 pin plug I'm not sure what for
Then far left is the fuse bar (presume I need to run a wire to the battery for)
Only have instructions for marks 4wd adapters and none from v6conversions so I'm guessing that's why this is so tricky to work out
#5 _ljshawn_
Posted 11 June 2017 - 08:55 PM
My vr/vs loom came from v6conversions. the colours in the instructions didnt match the loom supplied. I had a look around the net and found this help full.
http://www.calaistur....php?t=192333#. I found a computer drawing for a vs v8 on that site and sorted the loom
http://www.calaistur....php?t=192333#. I found a computer drawing for a vs v8 on that site and sorted the loom
Edited by ljshawn, 11 June 2017 - 08:55 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users