Hi,I've just had a UC Torana frontend installed in my '52 Chev and I'd like some ideas on what disc brakes to put on it.I have HZ disc and calipers,but I believe there are a few do's and don'ts to this setup.Any ideas>Cheers Murray
frontend
Started by
_52kiwi_
, Oct 29 2006 05:44 PM
6 replies to this topic
#1 _52kiwi_
Posted 29 October 2006 - 05:44 PM
#2 _CHOPPER_
Posted 29 October 2006 - 07:43 PM
There are plenty of different options, how much money do you want to spend?
#3 _smelvin_
Posted 30 October 2006 - 07:02 PM
Cmon guys. One of yous must have done the HQ-HZ brake conversion on a UC. I thought this would be a popular and fairly cheap brake upgrade. Any one done it?
Not sure if UC and LH are the same but this link may help...
http://www.gmh-toran...?showtopic=1012
Not sure if UC and LH are the same but this link may help...
http://www.gmh-toran...?showtopic=1012
Edited by smelvin, 30 October 2006 - 07:11 PM.
#4 _CHOPPER_
Posted 30 October 2006 - 08:04 PM
To do that conversion properly costs around AUS$650, depending on how cheap you can get some bits. A lot of people then decide to spend a bit more and get a better setup. Which is why I asked how much he wanted to spend.
#5 _52kiwi_
Posted 30 October 2006 - 10:20 PM
Thanks smelvin checked out that page and its a good one photos say a thousand works nice one.
#6 _smelvin_
Posted 01 November 2006 - 05:01 PM
No problem Murray. Am Kelzweld @ NZHRM.
#7 _52kiwi_
Posted 01 November 2006 - 06:36 PM
ok smelvin thanks for the site .muzza from NZHRM too
Edited by 52kiwi, 01 November 2006 - 06:37 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users