if i pull the steering wheel the whole thing moves fowards how can i fix that?
lc steering
Started by
torana?
, Nov 26 2006 05:27 PM
4 replies to this topic
#1
torana?
-
- Members
-
- 94 posts
Forum Member
- Location:QLD
- Joined: 23-May 06
Posted 26 November 2006 - 05:27 PM
#2
_73LJWhiteSL_
_73LJWhiteSL_
-
- Guests
Posted 26 November 2006 - 05:33 PM
Check the bush 'uni joint' on the bottom of the column steering shaft in the engine bay. I would say this is your problem. These things do go, and potentialy leave you with no steering.
Steve
Steve
Edited by 73LJWhiteSL, 26 November 2006 - 05:34 PM.
#3
_Feigz_
_Feigz_
-
- Guests
Posted 26 November 2006 - 07:00 PM
You might also want to look underneath the boss. There should be two screws holding the bearing into place. If the screws are missing or the plastic housing is cracked you will be able to move the steering shaft in and out by about 10-20mm. After that start back tracking each piece til you find the issue.
Edited by Feigz, 26 November 2006 - 07:01 PM.
#4
torana?
-
- Members
-
- 94 posts
Forum Member
- Location:QLD
- Joined: 23-May 06
Posted 27 November 2006 - 08:16 AM
I think its the retaining screws holding the bearing in place, also is there suposed to be a spacer between the bearing and the C-clip
#5
gtrboyy
-
- Members
-
- 3,140 posts
Lotsa Posts!
- Location:SYDNEY,NSW
- Joined: 07-November 05
Posted 27 November 2006 - 02:17 PM
Yes.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
