Just wondering if anyone has any info regarding how hard it would be to change to LX front guards and nosecone plus taillights on a UC?
I am aware that the bonnet, guards and nosecone are different + obviously the rad support etc but is there major differences with the inner guards (where the outer guards bolt to etc?
cheers,
Sam
LX panels on UC
Started by
Racehatch
, Dec 31 2005 04:25 PM
6 replies to this topic
#1
Racehatch
-
- Members
-
- 1,027 posts
Forum Fixture
- Location:Adelaide
- Joined: 07-November 05
Posted 31 December 2005 - 04:25 PM
#2
Toranavista
-
- Members
-
- 2,862 posts
'Let There Be Rock' 1977
- Location:CANBERRA
- Joined: 08-November 05
Posted 01 January 2006 - 06:25 AM
From memory the inner guards are different. I think there is a step up along the top edge above the hinges. Most people modify this area rather than unpic the inner guards. Perhaps someone has a good pic of the area.
#3
_muz_
_muz_
-
- Guests
Posted 02 January 2006 - 10:38 AM
Yeah the inner front guards are different and rad support.
More work required on the rear, where you have to cut the rear quarters
to make way for the LH/LX tail lights. This is because the UC ones sit on
the rear only, and the LH/LX wrap around the side.
Heap of work involved for both jobs.
Just buy an LH/LX.
Cheers
Muz
More work required on the rear, where you have to cut the rear quarters
to make way for the LH/LX tail lights. This is because the UC ones sit on
the rear only, and the LH/LX wrap around the side.
Heap of work involved for both jobs.
Just buy an LH/LX.
Cheers
Muz
#4
red1a
-
- Members
-
- 117 posts
Forum Member
- Location:Carnarvon Western Australia
- Car:lh torana slr
- Joined: 16-December 05
Posted 17 May 2006 - 07:21 PM
gday 
will the rear doors off a UC torana fit on the LH LX toranas
will the rear doors off a UC torana fit on the LH LX toranas
#6
red1a
-
- Members
-
- 117 posts
Forum Member
- Location:Carnarvon Western Australia
- Car:lh torana slr
- Joined: 16-December 05
Posted 17 May 2006 - 07:48 PM
great news cheers Azza
#7
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 17 May 2006 - 09:13 PM
I have all the spare parts you need for the conversion at both ends if you're interested.Just wondering if anyone has any info regarding how hard it would be to change to LX front guards and nosecone plus taillights on a UC?
I am aware that the bonnet, guards and nosecone are different + obviously the rad support etc but is there major differences with the inner guards (where the outer guards bolt to etc?
cheers,
Sam
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
