lc gtr boot badge

My LC GTR is currently being sprayed and I have used a different boot lid as it had a bobtail. This boot had its gtr badge hole marks all butchered, therefore I am stuck.

Does anyone have a genuine gtr boot lid that they could possibly look and measure for me as I need to know its correct positioning. Any help would be greatly appreciated, thank you.

Could anyone with a lc or lj gtr torana help me out? I just need the measurements from the badge to the edges of the bootlid.... anyone, please???

Hi

Will let you know later today. Just have to take a measurement.

John 0417 354 998 Croydon Melb

Location of GTR & Torana badge as measured from an original boot lid.


GTR Badge on the right side of the boot. Two holes measured from right edge and lower lip of boot lid.

Measurements taken with a flexible tape along the surface of the boot.

Hole one = 128mm up from lip 85mm in from edge.

Hole two = 118mm up from lip 165mm in from edge.

The Torana script Badge goes on the left side of boot. There are three holes measured from the left edge and the lower lip of the boot lid.

Measurements taken as before.

Hole one = 77mm from the lip 130mm from the edge.

Hole two = 131mm from the lip 111mm from the edge.

Hole three = 185mm from the lip 111mm from the edge.

All holes 4mm dia.

Hope this helps.

Thank you so much! I really appreciate the effort you went to for me.


Thanks again mate!