Will get out the books later, but is the six cylinder wiring harness different to the V8 one? If so, is it just from the clip in the engine bay onwards to the engine, or is it more extensive than that? I imagine wiring in the cabin is generic across the whole Torana range.
Six to V8 Wiring
Started by
_Unidentified_
, Jan 27 2007 08:24 AM
4 replies to this topic
#2
arrimar
-
- Members
-
- 3,134 posts
"Have you still got that Torana!"
- Location:brisbane
- Car:Salamanca L34, Absinth LH SLR/5000, Caribean Blue LH 5.0, C250 Merc,
- Joined: 13-January 06
Posted 27 January 2007 - 08:57 AM
pat,the difference is only in the engine loom.
however LH and LX are different in that the cabin loom in an LX extends down to the wiper washer bottle and LH only goes to the brake booster.
a 74 car has the loom clipped along the side of the bay around the back of the bonnet hinge. whilst a 75 car has the loom clipped along the engine bays wheel arch bulge(for want of a better description).
i bought a replacement loom from that e-bay guy and it fits really well. however on the one i got the temp sender and oil pressure sender wires were in opposite positions which was simple to remedy.
a manual car may need the neutral start switch wires run.
the loom to the horn will be different on LX due to the dipper controls.
however LH and LX are different in that the cabin loom in an LX extends down to the wiper washer bottle and LH only goes to the brake booster.
a 74 car has the loom clipped along the side of the bay around the back of the bonnet hinge. whilst a 75 car has the loom clipped along the engine bays wheel arch bulge(for want of a better description).
i bought a replacement loom from that e-bay guy and it fits really well. however on the one i got the temp sender and oil pressure sender wires were in opposite positions which was simple to remedy.
a manual car may need the neutral start switch wires run.
the loom to the horn will be different on LX due to the dipper controls.
#3
_devilsadvocate_
_devilsadvocate_
-
- Guests
Posted 27 January 2007 - 09:32 AM
Think you got up too early this morning arrimar, was therea manual car may need the neutral start switch wires run.
the loom to the horn will be different on LX due to the dipper controls.
last night?
#4
_Yella SLuR_
_Yella SLuR_
-
- Guests
Posted 27 January 2007 - 09:20 PM
Thankyou tah Arrimar. Yeah, it's an LX, not Yella, although it will have a couple of Yella bits on it.
#5
arrimar
-
- Members
-
- 3,134 posts
"Have you still got that Torana!"
- Location:brisbane
- Car:Salamanca L34, Absinth LH SLR/5000, Caribean Blue LH 5.0, C250 Merc,
- Joined: 13-January 06
Posted 27 January 2007 - 10:04 PM
thanks d.a but what i was refering to was if the car was an auto and i manual loom was fitted.....
i fully understand where you were coming from though.
its been hellishly hot here and the druggies across the road were up early having a domestic. so yes i was up early.
i fully understand where you were coming from though.
its been hellishly hot here and the druggies across the road were up early having a domestic. so yes i was up early.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
