Has any one ever tried putting Kingswood front springs in a torana front end?
Do they fit????
HQ,J,X,Z springs in a Torana
Started by
_Rally hatch_
, Feb 04 2007 05:09 PM
5 replies to this topic
#2
Toranamat69
-
- Members
-
- 2,117 posts
Forum R&D Officer
- Location:Brisbane
- Joined: 07-November 05
Posted 04 February 2007 - 06:21 PM
My LX had HZ front springs in it when I bought it so they do fit but the front was sitting pretty high - higher than standard - they would be too hard for the Torana front too as they are designed for a heavier vehicle - Unless that is what you are trying to achieve.
#3
Struggler
-
- Members
-
- 2,426 posts
Forum Fixture
- Name:Andrew or AJ
- Location:Canberra A.C.T.
- Car:UC Sedan
- Joined: 08-November 05
Posted 04 February 2007 - 07:17 PM
The best springs I ever had in a LX were HQ low with 2 coils cut off.
Opps, did I say that out loud ??
Opps, did I say that out loud ??
#4
_rorym_
_rorym_
-
- Guests
Posted 04 February 2007 - 09:26 PM
I checked this with Kings...the poundage is different..actually lighter and they are about 2 inches/50mm higher.
R
R
#5
_Rally hatch_
_Rally hatch_
-
- Guests
Posted 05 February 2007 - 04:58 AM
That is exactlly what I'm tring to achieve, i need to raise it and stiffen it right up....My LX had HZ front springs in it when I bought it so they do fit but the front was sitting pretty high - higher than standard - they would be too hard for the Torana front too as they are designed for a heavier vehicle - Unless that is what you are trying to achieve.
and being the tight a*s that I want to pay as little as possible
#6
MRLXSS
-
- Members
-
- 12,396 posts
The Render Garage
- Name:Matt
- Location:Upwey, Melbourne
- Car:355 LX Hatchback, DeLorean DMC-12, LX SS Hatch, VY Cross8 Crewman
- Joined: 09-November 05
Posted 05 February 2007 - 05:16 PM
i got torana springs in the Rear of my Hq... Does that count? haha it sits REALLY NICE!
Edited by 253ToranaSS, 05 February 2007 - 05:17 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
