could some one please giv me some tips on fitting flares it would be much appreciated
Need help fitting flares on LX 4 door
Started by
_caseyo69_
, Jan 13 2006 12:02 PM
5 replies to this topic
#1 _caseyo69_
Posted 13 January 2006 - 12:02 PM
#2
Posted 13 January 2006 - 01:40 PM
For the fronts, mount the front spoiler first then screw the rear of the flare to the sill and line it up with the front spoiler and mark out the holes. The rears are fairly simple, mount the rear half first and match up the front half.
#3 _levis_
Posted 13 January 2006 - 01:42 PM
its not to hard just fiddly, make sure there is another person to assist you so they can hold the flares in place so u can standback and check if it all ligns up n looks good. drill holes in the flares and have your mate hold it position stand bak make sure its in the right position and mark the holes with a marker. use a center punch then select the appropriate drill bit and drill the holes, make sure to clean up around the holes with some sandpaprer or sumthing so that rust cant start. polt it into place just tight enough for it to stay there so you can see if it lines up. take it of and cut the apropriate length of rubber be careful when installing it becus it looks like crap when the rubber doesent line up nicley...
i dont no if there is other ways to do this, this is only the way i did it and it turned out pretty good...
i dont no if there is other ways to do this, this is only the way i did it and it turned out pretty good...
#4
Posted 13 January 2006 - 02:44 PM
I am sure if you get real stuck one of us wouldn't mind giving you a hand, but where are you???
#5 _caseyo69_
Posted 13 January 2006 - 10:12 PM
thanks all for your help
#6 _caseyo69_
Posted 13 January 2006 - 10:14 PM
by the way i am in mt gambier in south oz
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users