i took the boss kit of my lc and tried to put a standard lc wheel on but it wont fit,
it wont go over the splines should i just force it ? or is it possible that its not the original steering shaft?
steering wheel
Started by
torana?
, Apr 17 2007 09:09 AM
4 replies to this topic
#1
torana?
-
- Members
-
- 94 posts
Forum Member
- Location:QLD
- Joined: 23-May 06
Posted 17 April 2007 - 09:09 AM
#2
bryanw
-
- Members
-
- 294 posts
Forum Fan
- Location:mildura
- Joined: 04-July 06
Posted 17 April 2007 - 09:20 AM
maybe one is a lj? lc, lj are different splines.
#3
_finer70_
_finer70_
-
- Guests
Posted 17 April 2007 - 05:30 PM
The Answer is NO NO NO. Never force anything that was made to fit.
Count the number of splines in the wheel and on the steering shaft also check diameter. If not the same it will never fit. If the same check for burring or deformation on the wheel and shaft.
Remember any hammering may cause the collapable shaft to do just that.
Count the number of splines in the wheel and on the steering shaft also check diameter. If not the same it will never fit. If the same check for burring or deformation on the wheel and shaft.
Remember any hammering may cause the collapable shaft to do just that.
#4
torana?
-
- Members
-
- 94 posts
Forum Member
- Location:QLD
- Joined: 23-May 06
Posted 17 April 2007 - 06:06 PM
i just counted the splines they both have 36
#5
_Bomber Watson_
_Bomber Watson_
-
- Guests
Posted 17 April 2007 - 07:23 PM
i take it the steering colom your using dosent have the ignition in the side of it, and the steering wheel has three spokes???
the lj standard gear has the ignition in the side of the colom and a two spoke steering wheel, cept for the gtr which was leather compared to the lc's wood outer...
the lj standard gear has the ignition in the side of the colom and a two spoke steering wheel, cept for the gtr which was leather compared to the lc's wood outer...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
