Hi guys,
Got my engine replaced about 2 months ago and have only driven car about 5 or 6 times since then but last 3 times I have had trouble getting reverse after been for a drive. I have no trouble selecting it when backing out of shed when cold and doing some 3 point turns, but when at operating temperature after driving when selecting it, the gears grind together as if I havent got the clutch pushed in at all. First also seems a bit tricky when selecting it but the gears dont grind/crunch as much.
Could it be my clutch needs adjusting(hydraulic), or oil missing from the box?
Cant get reverse when warm
Started by
_Pallbag_
, Nov 05 2007 07:13 AM
2 replies to this topic
#2
FastEHHolden
-
- Members
-
- 5,114 posts
Steptoe
- Location:Central Coast NSW
- Joined: 16-November 05
Posted 05 November 2007 - 07:23 AM
Its clutch adjustment....the reason your forward gears are working is the syncros are helping out...try bleeding first.
Edited by FastEHHolden, 05 November 2007 - 07:23 AM.
#3
LX2DR
View Garage
-
- Members
-
- 1,763 posts
Forum Fixture
- Name:Paul
- Location:Melbourne
- Joined: 21-November 05
View Garage
Posted 05 November 2007 - 10:06 AM
Definitely sounds like clutch adjustment, a little too much free play.
How far off the floor is the pedal when the clutch starts to take up? If it�s really close to the floor, it only needs adjusting.
How far off the floor is the pedal when the clutch starts to take up? If it�s really close to the floor, it only needs adjusting.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
