Hey, I dont have a demister switch in my dash myself, but I need to help someone remove one.
They said that they dont know how to remove it without breaking something..
Any ideas?
Cheers
Removing Demister Switch From Dash
Started by
_kenno_
, Feb 12 2006 04:48 PM
5 replies to this topic
#1 _kenno_
Posted 12 February 2006 - 04:48 PM
#2
Posted 12 February 2006 - 06:54 PM
You need to get to the back of the switch. There is a cradle type retaining bracket. It is held on by a lug each side of the switch body. You need to remove the retaining braket by releasing the side pins with a small flat head screwdriver.
#3
Posted 12 February 2006 - 06:55 PM
You can get them out by usind a small screwdriver from the top and bottom, pushing the little clips in, however to be on the safe side get them to remove the whole facia.
#4 _hux454_
Posted 12 February 2006 - 07:10 PM
I just replaced mine as I found a better one I bought off ebay. I tried myself to do what the other blokes said but it looked like I was going to scratch the dash too much so I played it safe & took the facia out to do it properly.
#5 _kenno_
Posted 13 February 2006 - 12:00 PM
cool thanks guys
#6
Posted 13 February 2006 - 12:52 PM
You have to remove the dash, the clip that holds it in is on the back.I just replaced mine as I found a better one I bought off ebay. I tried myself to do what the other blokes said but it looked like I was going to scratch the dash too much so I played it safe & took the facia out to do it properly.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users