currently on my LH the M/cyl has a big and a small nut for the brake lines, does the large nut line go to the large nut on the prop valve?
what part number should I quote when i am getting a new master cyl?
sorry for being vauge, im in a rush.
cheers
master cyl and brake line Q's
Started by
makka
, Feb 16 2006 05:29 PM
4 replies to this topic
#1
makka
-
- Members
-
- 3,559 posts
A m��se once bit my sister
- Name:Cohen
- Location:ya daughters place
- Joined: 08-November 05
Posted 16 February 2006 - 05:29 PM
#2
dattoman
-
- Administrators
-
- 16,472 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 16 February 2006 - 09:48 PM
Large nut goes to the rear brakes
P7210 is the early cylinder
P7369 is the later cylinder
technically LH should have the early cylinder
P7210 is the early cylinder
P7369 is the later cylinder
technically LH should have the early cylinder
#3
makka
-
- Members
-
- 3,559 posts
A m��se once bit my sister
- Name:Cohen
- Location:ya daughters place
- Joined: 08-November 05
Posted 18 February 2006 - 01:38 PM
but the later one is better?
are they both 1 inch bore?
are they both 1 inch bore?
#4
dattoman
-
- Administrators
-
- 16,472 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 18 February 2006 - 01:44 PM
Same
Just different nut configurations
If you to to the other master you will have to redo your pipes
Just different nut configurations
If you to to the other master you will have to redo your pipes
#5
makka
-
- Members
-
- 3,559 posts
A m��se once bit my sister
- Name:Cohen
- Location:ya daughters place
- Joined: 08-November 05
Posted 18 February 2006 - 01:52 PM
so the early one has the large nut at the rear?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
