Chasing a part...
#1 _sstorana_
Posted 20 February 2006 - 06:34 PM
this is a quick one. Hopefully some one out there might be able to help me..
The part that I am chasing is a Seal - Grille Lacing. Now you ask "what is that!!"
Well you all know the grille panel that sits between the bonnet and the windscreen..
Well when you take it off, there are six hard plastic seals that are used along the top (windscreen) edge.
The holden part no I have is.. 2823932. (not sure if that's the latest)
I have checked the Rares Website, but I came up with nothing..
If anyone has any idea where I might be able to get these new, that would be great
cheers
Mick
#2 _keith1962_
Posted 20 February 2006 - 09:17 PM
Have you rang SPECTRUM it is located in St Marys (Sydney)
Ph:02 9623 5333
Fax 02 9833 1041
these guys carry shit you would not believe
cheers
Keith
#3 _sstorana_
Posted 21 February 2006 - 09:37 AM
thank mate, tried them... no luck
cheers
Mick
#4 _RTS Guy_
Posted 21 February 2006 - 11:38 AM
if you have any luck please post back.
#5 _keith1962_
Posted 21 February 2006 - 08:31 PM
i have to take mine off this week to paint so i will take a sample with me to
spectrum just in case the guy you spoke too was not sure which clips are needed
so leave to me & i will see what i can chase up ok.
cheers
Keith
#6 _keith1962_
Posted 21 February 2006 - 08:33 PM
cheers
keith
#7
Posted 21 February 2006 - 09:14 PM
#8 _les_
Posted 23 February 2006 - 03:18 PM
I have just been looking in a clip book and come across a couple of part that look similar they are Nissan parts Part Number 01553-02923 or80874-85E00Hi all
this is a quick one. Hopefully some one out there might be able to help me..
The part that I am chasing is a Seal - Grille Lacing. Now you ask "what is that!!"
Well you all know the grille panel that sits between the bonnet and the windscreen..
Well when you take it off, there are six hard plastic seals that are used along the top (windscreen) edge.
The holden part no I have is.. 2823932. (not sure if that's the latest)
I have checked the Rares Website, but I came up with nothing..
If anyone has any idea where I might be able to get these new, that would be great
cheers
Mick
Let me know if they fit if you cannot get some I can import some
#9
Posted 23 February 2006 - 04:29 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users