Guys how do you tell a XU1 fan from a atock 6 cyl fan, iv seen fans on ebay fetch ridicules amounts of money...
John
XU1 engine fan
Started by
_TORANASS_
, Feb 20 2006 07:10 PM
7 replies to this topic
#1 _TORANASS_
Posted 20 February 2006 - 07:10 PM
#2
Posted 20 February 2006 - 07:41 PM
it has cut outs in the fan blades..I think XU1's had a retaining bolt on the demonic balancer..err harmonic balancer...the cut outs were to clear that.
#3 _Bomber Watson_
Posted 20 February 2006 - 08:46 PM
so basicaly aint nothing an angle grinder can't fix.....
#4 _TORANASS_
Posted 20 February 2006 - 08:55 PM
Cool thanks guys, what are they worth in decent condition accoding they the real deal..
John
John
#5
Posted 20 February 2006 - 09:21 PM
cut outs in the fan blade were only on 73 bathurst xu1,s
LC 13 !/2 inch diameter
LJ 72 15 1/2 inch diametre
LJ 73 14 3/4 inch diametre
go to the wrecking yards look for round ended fans on other early holdens models look for these measurements , however most holdens will have the square ended ones which arent correct .
LC 13 !/2 inch diameter
LJ 72 15 1/2 inch diametre
LJ 73 14 3/4 inch diametre
go to the wrecking yards look for round ended fans on other early holdens models look for these measurements , however most holdens will have the square ended ones which arent correct .
#6 _TORANASS_
Posted 20 February 2006 - 09:27 PM
Thaks 830hp, im not after one myself a mate is.. Another mate is wrecking an LC witch has a fan with cutouts and i was asked to see if its a XU1 fan with cutouts and was just trying to get a fair price for him..Seen as there both mymates i cant sell it too cheap nor can i sell it for too much...
John
John
#7
Posted 21 February 2006 - 12:08 AM
They had an extra retaining plate that bolted on where you would normally fit a puller to remove the balancer. It was help stop the balancer separating. What it meant was the fan had to clear the 3 extra bolts that on a stocky weren't there.
See if your mate's car has the retainer on the balancer as well. They are worth a bit.
RACV MAN
See if your mate's car has the retainer on the balancer as well. They are worth a bit.
RACV MAN
Edited by rodomo, 21 February 2006 - 12:10 AM.
#8 _doublin gtr_
Posted 21 February 2006 - 07:09 AM
only 73 bathurst cars had the cutout and retainer plate
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users