RB30 UC
#1 _brett_32i_
Posted 24 February 2006 - 09:45 AM
being going slow and steady for the past 6 months. i have a house now so have to share the time between house and torana.
#2 _dansedgli_
Posted 24 February 2006 - 01:33 PM
RB30 conversions seem the way to go these days, I bet you cant wait to get it finished. I know I cant.
#3 _QIKSLR_
Posted 24 February 2006 - 01:49 PM
#4
Posted 24 February 2006 - 03:14 PM
It's gonna be nuts though; keep us posted Brett!
#5 _NVMYLH_
Posted 26 February 2006 - 04:55 PM
#6
Posted 26 February 2006 - 05:25 PM
#7 _brett_32i_
Posted 26 February 2006 - 07:36 PM
i'll take a measure and a phot next time im under there. remind me if i forget....Does your gearbox hang much below the chassis rails underneath?
#8 _brett_32i_
Posted 04 March 2006 - 05:47 PM
measured the crossmember, about 5mm below chassis rails. gearbox is all above the rails.
if you used a thin gearbox mount then it wouldnt be lower at all.
i went to take a pic for you, but baterries were flat.....
tomorrow i try again.
#9 _brett_32i_
Posted 21 March 2006 - 09:26 PM
new tail lights, and my first UC.
#10 _devilsadvocate_
Posted 21 March 2006 - 09:39 PM
What are the rear lights from? Have you got a view from the side....just to see how flush they sit?
Hope you get there soon.
Edited by devilsadvocate, 21 March 2006 - 09:43 PM.
#11 _brett_32i_
Posted 22 March 2006 - 09:18 AM
dont think so? send it to me anyway [email protected] so i know what it is you're talking about.was it u i sent the rb30 conversion article to?..............was a while ago, have there been many hidden probs?
plenty of problems. most caused by crs
#12 _devilsadvocate_
Posted 22 March 2006 - 12:55 PM
#13
Posted 22 March 2006 - 03:50 PM
#14
Posted 22 March 2006 - 04:52 PM
#15 _user asked to be removed_
Posted 26 March 2006 - 10:38 AM
*Liam
#16 _brett_32i_
Posted 30 March 2006 - 09:06 PM
too low for me.
anyone want to swap springs?
290mm from centre of rim to guard lip. (they're yellow and shiny)
#17 _UCV80_
Posted 30 March 2006 - 09:22 PM
Sure u wanna go those tail lights? makes it look a bit like a 626 mazda. whateva floats your boat
The standard lights arent that bad i quite like them, i think they grow on u after a while lol
Is it going to be street legal or just for the strip?
Cheers,
Nathan
#18 _dansedgli_
Posted 31 March 2006 - 06:57 AM
#19
Posted 31 March 2006 - 07:32 AM
#20
Posted 31 March 2006 - 10:43 AM
#21 _brett_32i_
Posted 31 March 2006 - 06:08 PM
#22 _brett_32i_
Posted 20 April 2006 - 10:25 PM
starter spun around, dash lights a go-go, and 12v at the coil.
pulled apart my grenade, which was originally only going to be a set of rings, which turned into big ends, and now i have to do mains. frustrating...
but its moving along slowly.
#23 _lj chev_
Posted 21 April 2006 - 07:16 PM
#24 _brett_32i_
Posted 22 April 2006 - 09:20 AM
#25 _Aidan_
Posted 28 April 2006 - 09:24 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users