Hey guys out of the alternator there is a 2 pin spring loaded plug which has come apart on my car, both wires are green but one goes to a brown spade connector in the plastic harness, does it matter which one goes back where when i replace the plug, I assume one goes to starter and one to warning light????
LX SLR5000 wiring
Started by
GML-31
, Nov 20 2005 07:17 AM
4 replies to this topic
#1
GML-31
-
- Members
-
- 5,239 posts
Oh My, Don't you post alot
- Name:Kev
- Location:Highland Park
- Car:too many
- Joined: 08-November 05
Posted 20 November 2005 - 07:17 AM
#2
GML-31
-
- Members
-
- 5,239 posts
Oh My, Don't you post alot
- Name:Kev
- Location:Highland Park
- Car:too many
- Joined: 08-November 05
Posted 20 November 2005 - 11:54 AM
no-one???
#3
_Flamenco_
_Flamenco_
-
- Guests
Posted 20 November 2005 - 03:11 PM
Are there no symbols or letters shown on the plug gml-31?
This is going off memory but on my bosch one that's about a year old I had two wires, one to sense when the ignition was turned on and one for the warning light...
This is going off memory but on my bosch one that's about a year old I had two wires, one to sense when the ignition was turned on and one for the warning light...
#4
GML-31
-
- Members
-
- 5,239 posts
Oh My, Don't you post alot
- Name:Kev
- Location:Highland Park
- Car:too many
- Joined: 08-November 05
Posted 20 November 2005 - 05:14 PM
it is a bosch one...one is marked s (starter?) the other l (light??) but the problem is which is which... they both come out of the plug green but one changes to brown about 100mm along.... so does anyone know what colour the starter or switch is????
#5
_Flamenco_
_Flamenco_
-
- Guests
Posted 20 November 2005 - 05:28 PM
I think the 'S' means sense (sensing the accessories power) and 'L' means the charge light/warning light. I think the bosch site has the instructions online, have a see on google.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
