Hey
I wasjust wondering if a v8 Booster/ master cylinderwil lbolt stright up into a 6 cyl Lx? will i just have to manipulate the brake lines alittle bit to make them fit?
Cheers
Barns
V8 booster
Started by
barny_lx
, Mar 10 2006 08:45 AM
3 replies to this topic
#1
Posted 10 March 2006 - 08:45 AM
#2 _Perth Brake Parts_
Posted 10 March 2006 - 01:34 PM
If you get the matching one to suit the pedal you have yes
There are straight and bent rod versions
There are straight and bent rod versions
#3 _TOBES_
Posted 10 March 2006 - 03:56 PM
Interesting question for you.....
Can the rods be changed between the boosters???
Eg - Torana bent rod into a Commodore booster...
Can the rods be changed between the boosters???
Eg - Torana bent rod into a Commodore booster...
#4
Posted 10 March 2006 - 05:29 PM
I just went and double checcked but they look like they will interchange to me.
I have just got my Commodore (VH512) booster back from HPC and I am getting the exact swap done that you are talking about as soon as I can get the bits all up to the brake shop.
I am using the bent rod from a UC double diaphram booster VH346 so not sure if they are the same input rod as the single diaphram - I have one of them too but it is not pulled apart to measure.
M@
I have just got my Commodore (VH512) booster back from HPC and I am getting the exact swap done that you are talking about as soon as I can get the bits all up to the brake shop.
I am using the bent rod from a UC double diaphram booster VH346 so not sure if they are the same input rod as the single diaphram - I have one of them too but it is not pulled apart to measure.
M@
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users