I have 2 crossmembers to choose from.
I would like to know 2 things.
Are LC & LJ suspension crossmembers different.
And what is the difference.
Also one of the crossmembers has extra holes drilled about 1" down for the top control arms.
Are the top control arms the same whether the top or bottom holes are used?
If not can someone tell me the difference.
Thanks, John.
Crossmember for LC LJ
Started by
_LoneOranger_
, Mar 21 2006 01:34 AM
6 replies to this topic
#1 _LoneOranger_
Posted 21 March 2006 - 01:34 AM
#2
Posted 21 March 2006 - 07:58 AM
As far as I know LC/LJ cross members are the same. The cross member with the extra holes should be from an XU-1, use the lower holes when mounting the upper control arms, plus longer bolts & extra spacers to correct the wheel alignment. The control arms are the same.
#3 _LoneOranger_
Posted 21 March 2006 - 11:40 AM
Thanks Warrenm,
That's just what I wanted to hear.
regards, John.
That's just what I wanted to hear.
regards, John.
Edited by LoneOranger, 21 March 2006 - 11:40 AM.
#4
Posted 21 March 2006 - 02:50 PM
The only difference I found was that lc's have 2 brackets for the brake lines & lj have 1 bracket at the front of the crossmember.
#5 _LoneOranger_
Posted 21 March 2006 - 05:09 PM
Thanks for that gtrboyy,
They may either be 2 LCs or 2 LJs or one of each.
I'll have look at them.
They may either be 2 LCs or 2 LJs or one of each.
I'll have look at them.
#6
Posted 21 March 2006 - 10:03 PM
What I should have said is that there are 2 brackets for the brake line & block on the driver's side for lc's & only 1 bracket for lj's.I hope it makes a bit more sense lol.
#7 _gtr161s_
Posted 22 March 2006 - 05:53 PM
I have a 5/70 lc gtr susp which has the brake preportioning valve bracket on the susp whereas the other gtr i have (4/71) doesnt have the same bracket as that valve is mount on the chassis rail
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users