hi,
i know that the VL turbo diff is 28 spline like the vn---> diffs. but this is an axle question, what i need to know is the standard axle length for an axle from a Vl turbo diff as opposed to a normal VN----> diff. does anyone have the measurments handy?
im just curious on how my BW diff was shortened as i suspect one axle is standard length and the other isn't (well so the diff guy told me anyway), i hope this is the case coz them i'll have to only respline 1 axle not 2, (all this trouble to run disk brakes in the rear). if its too painfull i'll stick with the drums for now.
just seeking the truth....
cheers guys
john
BW vl turbo diffs
Started by
_LX CHAMOIS HATCH_
, Mar 22 2006 10:01 PM
4 replies to this topic
#2
warrenm
View Garage
-
- Members
-
- 2,107 posts
Forum Fixture
- Location:Central West NSW
- Car:1972 LJ Torana
- Joined: 08-November 05
View Garage
Posted 23 March 2006 - 07:14 AM
VL axles,Left=695mm flange to tip
Right=790mm
Right=790mm
#3
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 23 March 2006 - 08:20 PM
That's interesting, my diff bloke told me the BW axles have a 2" lenght difference side to side. I might pull mine out one day to check.
#4
_LX CHAMOIS HATCH_
_LX CHAMOIS HATCH_
-
- Guests
Posted 23 March 2006 - 08:56 PM
cheers guys the more imput the better...
john
john
#5
warrenm
View Garage
-
- Members
-
- 2,107 posts
Forum Fixture
- Location:Central West NSW
- Car:1972 LJ Torana
- Joined: 08-November 05
View Garage
Posted 24 March 2006 - 07:11 AM
Re measured axles plus another set from a Ford & is 95mm difference.
Waz
Waz
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
