I have some UC rear discs and I think they are stuff. One disc ranges fom 14.87mm to 15.20mm, and will need machined as it's got big groove in it.
uc rear discs
Started by
lakeside
, Mar 26 2006 05:40 PM
1 reply to this topic
#1
lakeside
-
- Members
-
- 2,703 posts
Lotsa Posts!
- Name:Col
- Location:melb
- Car:LC SBC
- Joined: 07-November 05
Posted 26 March 2006 - 05:40 PM
#2
dattoman
-
- Administrators
-
- 16,472 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 26 March 2006 - 06:43 PM
By the letter of the law once the disc gets to its minimum/scrap thickness its to go in the bin......... not on the car
As the UC rear disc has a scrap thickness of 14.7mm I'd say technically you can't machine them and refit
However......... there are no aftermarket or genuine replacements so what do you do?
If it was me and I needed them on my car I'd machine and refit
Once they got to 13mm I'd be changing the rear end to something I could get parts for
As the UC rear disc has a scrap thickness of 14.7mm I'd say technically you can't machine them and refit
However......... there are no aftermarket or genuine replacements so what do you do?
If it was me and I needed them on my car I'd machine and refit
Once they got to 13mm I'd be changing the rear end to something I could get parts for
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
