qld torana club cruise Pics
#1 _T0rana_
Posted 01 April 2006 - 06:59 PM
#2 _MRNOS_
Posted 01 April 2006 - 07:12 PM
Edited by NOSLH, 01 April 2006 - 07:14 PM.
#3 _SL/R SS A9X_
Posted 02 April 2006 - 07:16 AM
What happened to it?
Is there any damage?
The Pictues are good!
Jason
Edited by SL/R SS A9X, 02 April 2006 - 07:18 AM.
#4 _Loki_
Posted 02 April 2006 - 11:16 AM
When I left in the morning she was shuddering all over the place when taking off [and was fine the night before], felt like it was running on 7 cyls, checked all spark plugs and all cyls were firing.
Checked tranny fluid etc. at Mt Cootha and then drove it to next stop, was still shuddering.
Started to have a look at it up there and alot of people had a look.
Was idling fine in Neutral/Park, drop it into any gear (reverse/D/1/2) and the car was shaking and a loud knocking sound could be heard coming from back of the engine/gearbox area.
Alot of people suspected a loose torque convertor, so the car was placed in a gully area as a 'bush-mechanics' car-jack to tighten them up [as seen in the pic].
The turned out to be tight and not causing the problem......
The problem was the extractors banging on the front sway bar causing the entire car to shudder and bounce, I suspect bottoming out on a speedbump at my local ice rink the night previous was the cause.
The damage on the nosecone has been there for a long time, a result of a hand-brake self-release, haven't yet spray painted the nosecone in the garage to replace it.
Many props to the guys for the help so I could continue onto the next stop
I have some video and pics which I will post up later.
#5
Posted 02 April 2006 - 11:34 AM
Had the same prob with my car untill I got the engine mounts replaced.... you can still see where the extractor pipe is pushed in from the sway bar it was that bad.
Great pics, looks like you had a great day for it.
#6
Posted 08 April 2006 - 04:31 PM
Just wondering what the paint and trim codes are Loki.The SL/R is mine.
#7 _Loki_
Posted 09 April 2006 - 01:22 PM
I'll get them for you later, I have to go to work now.Just wondering what the paint and trim codes are Loki.The SL/R is mine.
Send me a PM to remind me.
#8
Posted 09 April 2006 - 08:10 PM
#9 _Loki_
Posted 10 April 2006 - 09:18 AM
No drama's mate, I haven't forgotten, just work long hours at odd hours, I have to go out now and try to fix speedo before work so I'll grab them for you and send you a PM shortly.PM sent
#10 _Loki_
Posted 10 April 2006 - 09:58 AM
Speedo cable busted bleh.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users