hi
just wondering if any could tell me what sort of power (HP) i could expect from this motor:
308 black motor, bored 030", honed, decked
acl race series forged pistons
black motor rods
l34 heads, tufftrided valves, mild port and polish job
roller rockers
286 crane cam
pacemaker extractors
torque power single plain manifold
twin 45mm webers
any opinions/thoughts appreciated
cheers
Power figures 308
Started by
_heppy_ss_76_
, Apr 01 2006 07:42 PM
7 replies to this topic
#2
_dannylxss_
_dannylxss_
-
- Guests
Posted 01 April 2006 - 08:02 PM
mabie 280 to 300 hp is my guess has in been raced before if so what mph in what car 
#3
_heppy_ss_76_
_heppy_ss_76_
-
- Guests
Posted 01 April 2006 - 08:05 PM
no this is a brand new motor just built, i may buy it off my mate, just interested to get input on power figures, cheers
#4
_dave720gtr_
_dave720gtr_
-
- Guests
Posted 01 April 2006 - 08:19 PM
what he sead is what you get i just built one identical useing the same parts except for the weders, 650 dpumper for a mate and thats all you get topsmabie 280 to 300 hp is my guess has in been raced before if so what mph in what car
#5
_rorym_
_rorym_
-
- Guests
Posted 01 April 2006 - 09:30 PM
I am looking at 280 with a Rochie...basically same engine..about 210/220 at the bags...but mine is in an LC
R
R
#6
FastEHHolden
-
- Members
-
- 5,114 posts
Steptoe
- Location:Central Coast NSW
- Joined: 16-November 05
Posted 02 April 2006 - 09:24 AM
I'm going 215hp at the wheels...are you getting it dynoed? Is this gunna be another KeithyUC style post? 
#7
Evan
View Garage
-
- Members
-
- 1,287 posts
Forum Fixture
- Location:Perth Western Australia
- Joined: 14-January 06
View Garage
Posted 04 April 2006 - 04:43 PM
myne is
308 60 thou
standard rods
standard pistons.
head slight port
big valves,
edelbrok manifold
650dp mech sec.
extractors.
standard rockers.
i got 192 hp at the rears and 13.9 quater with 2.78 diff.
yours should be a fair bit better than myne.
308 60 thou
standard rods
standard pistons.
head slight port
big valves,
edelbrok manifold
650dp mech sec.
extractors.
standard rockers.
i got 192 hp at the rears and 13.9 quater with 2.78 diff.
yours should be a fair bit better than myne.
Edited by Evan, 04 April 2006 - 04:44 PM.
#8
_Keithy's_UC_
_Keithy's_UC_
-
- Guests
Posted 04 April 2006 - 06:48 PM
Hey, mega flashback! 
Should get the engine onto a dyno for run-in or take the old girl to a dyno dynamics dyno.... Now with the twins and the crane cam you have, i would estimate about 250HP at the fly wheel/flex plate.
Again, this is just going off the specs you have posted... I'm sure there are folks on here who have had similar setups (in their days!!!) who would happily quote some more accurate power figures!
Keithy
Should get the engine onto a dyno for run-in or take the old girl to a dyno dynamics dyno.... Now with the twins and the crane cam you have, i would estimate about 250HP at the fly wheel/flex plate.
Again, this is just going off the specs you have posted... I'm sure there are folks on here who have had similar setups (in their days!!!) who would happily quote some more accurate power figures!
Keithy
Edited by Keithy's_UC, 04 April 2006 - 06:49 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
