Hey guys, does anybody know a part number for an LH/X SL/R Cluster, speedometer cable to suit Turbo 350 gbox?
The one I have which is only a few months old has sheered off just behind the dash, I had it sent up from castlemain rodshop with the '350 crossmember a long time ago, would prefer a part number so as to pick one up myself locally if possible.
-Cheers.
Part #: Turbo 350 Speedo Cable?
Started by
_Loki_
, Apr 10 2006 10:02 AM
7 replies to this topic
#2
LS1LX
-
- Members
-
- 1,931 posts
Forum Fixture
- Location:Sydney
- Joined: 22-November 05
Posted 10 April 2006 - 09:49 PM
Ill get you the holden p/n there around $60 thru Holden.
I got one a few months back, there just a cable to suit HQ-WB with TH trans.
Give me 24 hours
I got one a few months back, there just a cable to suit HQ-WB with TH trans.
Give me 24 hours
#3
_Loki_
_Loki_
-
- Guests
Posted 10 April 2006 - 10:43 PM
Awesome, thanks mate.Ill get you the holden p/n there around $60 thru Holden.
I got one a few months back, there just a cable to suit HQ-WB with TH trans.
Give me 24 hours
And yeah that sounds about how much I paid for this one, dodgy thing only lasted a few months though :/
Must have given it too hard a time
#4
LS1LX
-
- Members
-
- 1,931 posts
Forum Fixture
- Location:Sydney
- Joined: 22-November 05
Posted 11 April 2006 - 08:04 AM
Must of been too tightly kinked or too close to exhaust heat.Awesome, thanks mate.Ill get you the holden p/n there around $60 thru Holden.
I got one a few months back, there just a cable to suit HQ-WB with TH trans.
Give me 24 hours
And yeah that sounds about how much I paid for this one, dodgy thing only lasted a few months though :/
Must have given it too hard a time
#5
_Loki_
_Loki_
-
- Guests
Posted 11 April 2006 - 04:12 PM
It was sagging alot at the gearbox end (would nip ground over bumps etc.) I pulled some more through behind the dash and yes, it must have been too kinked and so it snapped.Must of been too tightly kinked or too close to exhaust heat.
Awesome, thanks mate.Ill get you the holden p/n there around $60 thru Holden.
I got one a few months back, there just a cable to suit HQ-WB with TH trans.
Give me 24 hours
And yeah that sounds about how much I paid for this one, dodgy thing only lasted a few months though :/
Must have given it too hard a time
When I received it, it was practically doubled over itself 500 times, that may not have helped.
Get that part # at all?
No real rush, I can handle not having a speedo for the short trip to work and back for next 2 weeks.
#6
LS1LX
-
- Members
-
- 1,931 posts
Forum Fixture
- Location:Sydney
- Joined: 22-November 05
Posted 11 April 2006 - 07:53 PM
If iots too long put some retaining clips on it and fasten it somewhere.
Had a look today, but I have thrown the box out.
Just ring holden and ask for a speedo cable to suit HQ-WB with TH350.
They do stock them just need someone behind the counter with half a brain and you'll have it the same day.
Had a look today, but I have thrown the box out.
Just ring holden and ask for a speedo cable to suit HQ-WB with TH350.
They do stock them just need someone behind the counter with half a brain and you'll have it the same day.
#7
_Loki_
_Loki_
-
- Guests
Posted 11 April 2006 - 10:06 PM
Therein lay the problemjust need someone behind the counter with half a brain and you'll have it the same day.
I'll give it a shot, cheers.
#8
Stedz_lc
-
- Members
-
- 1,144 posts
Forum Fixture
- Joined: 10-November 05
Posted 17 April 2006 - 07:10 PM
Agree with ^^ Becuase i was told they dont have them any more from holden :| ! I got a powerglide one i think it was which went in well was a bit longer from say a hq or somthin along those lines...
Cheers
Stedz
Cheers
Stedz
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
