Interested in knowing is there a difference in the dash wiring harness from LH SL torana to the SLR torana dash. Ive hooked it up with the SL wirering and the tacho needle is jumping up and down. Any help would be grateful cheers red1a
SLR instrument panel
Started by
red1a
, Apr 22 2006 12:56 AM
6 replies to this topic
#1
red1a
-
- Members
-
- 117 posts
Forum Member
- Location:Carnarvon Western Australia
- Car:lh torana slr
- Joined: 16-December 05
Posted 22 April 2006 - 12:56 AM
Gday
Interested in knowing is there a difference in the dash wiring harness from LH SL torana to the SLR torana dash. Ive hooked it up with the SL wirering and the tacho needle is jumping up and down. Any help would be grateful cheers red1a
Interested in knowing is there a difference in the dash wiring harness from LH SL torana to the SLR torana dash. Ive hooked it up with the SL wirering and the tacho needle is jumping up and down. Any help would be grateful cheers red1a
#3
red1a
-
- Members
-
- 117 posts
Forum Member
- Location:Carnarvon Western Australia
- Car:lh torana slr
- Joined: 16-December 05
Posted 22 April 2006 - 02:24 AM
Is its best ground at the fuse panel,were its scewed down.
cheers red1a
cheers red1a
#4
_munro_
_munro_
-
- Guests
Posted 22 April 2006 - 02:29 AM
there was an issue that a few people had with those tacho's and i'm pritty sure it had something to do with loose wiring either power or ground
apart from that hopefully someone with an slr dash will jump in and shed some light
apart from that hopefully someone with an slr dash will jump in and shed some light
#5
red1a
-
- Members
-
- 117 posts
Forum Member
- Location:Carnarvon Western Australia
- Car:lh torana slr
- Joined: 16-December 05
Posted 22 April 2006 - 02:56 AM
I wouldnt know my self whether the electronic ing would have a to be grounded some way by it self not sure
red1a
red1a
#6
_77LXSleeper_
_77LXSleeper_
-
- Guests
Posted 23 April 2006 - 10:56 AM
Hi
Back in 1982 I purchased a new SLR dash wiring harness only to find out I needed 1 extra wire for the tacho and different senders.
Boy have I wasted some money over the years, but I have learnt a lot.
Sold the harness for 10% of what I paid
.
I have been an Electrician for over 20 years now.
Cheers
Jaimie
Back in 1982 I purchased a new SLR dash wiring harness only to find out I needed 1 extra wire for the tacho and different senders.
Boy have I wasted some money over the years, but I have learnt a lot.
Sold the harness for 10% of what I paid
. I have been an Electrician for over 20 years now.
Cheers
Jaimie
#7
LS1LX
-
- Members
-
- 1,931 posts
Forum Fixture
- Location:Sydney
- Joined: 22-November 05
Posted 23 April 2006 - 07:35 PM
did the SL have a tacho or a clock?
if it had a clock theres your problem, if it had a tacho, check the wire is not damaged and shorting out.
if it had a clock theres your problem, if it had a tacho, check the wire is not damaged and shorting out.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
