I seem to remember that A9X hatchs had a UC rear floor to allow more rubber to fit under the back or was I asleep at the time? (This has nothing to do with my next project..!!..Well...maybe..)
R
Did A9X hatches have a different rear floor?
Started by
_rorym_
, May 09 2006 08:01 PM
6 replies to this topic
#2
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 09 May 2006 - 08:10 PM
They had the front half of the UC rear floorpan patched in for the different top control arm mounting position. The LX rear half was left as LX, hence the location of the spare tyre.
#3
_rorym_
_rorym_
-
- Guests
Posted 09 May 2006 - 08:40 PM
So the front upright posotion was the only difference Chop?
R
R
#4
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 09 May 2006 - 08:58 PM
From the wheel well back to the rear bumper, it was LX floor pan. From the wheel well to the front of the rear seat is UC floor pan. Hope that makes a bit more sense.
#5
_Flamenco_
_Flamenco_
-
- Guests
Posted 10 May 2006 - 06:21 AM
Just to add, A9X sedans also had the UC type floorpan at the back for the 10bolt sailisbury...
#6
_rorym_
_rorym_
-
- Guests
Posted 10 May 2006 - 07:25 AM
So its basically the diff hump in the rear floor behind the seat.?
R
R
#7
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 10 May 2006 - 07:36 PM
Yes. And the part of the floor directly in front of the hump where the top control arms are attached to the floorpan.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
