workout what this is
#1
Posted 15 May 2006 - 01:40 AM
#2 _high_rpm_
Posted 15 May 2006 - 01:45 AM
#3 _[BOTTLEDUP]_
Posted 15 May 2006 - 01:52 AM
#4
Posted 15 May 2006 - 05:47 AM
Edited by smeer, 15 May 2006 - 05:48 AM.
#5 _MRNOS_
Posted 15 May 2006 - 08:08 AM
#6 _Herne_
Posted 15 May 2006 - 09:44 AM
Herne
#7
Posted 15 May 2006 - 10:51 AM
#8
Posted 15 May 2006 - 12:09 PM
#9
Posted 15 May 2006 - 03:10 PM
#10 _dave720gtr_
Posted 15 May 2006 - 04:06 PM
thats it,May 15 2006, 01:52 AM] two small block Chevs... Siamese twins from the looks.
#11 _MAWLER_
Posted 15 May 2006 - 04:14 PM
#12
Posted 15 May 2006 - 04:25 PM
#13
Posted 15 May 2006 - 04:39 PM
Cheers
Edited by makka, 15 May 2006 - 04:41 PM.
#14
Posted 15 May 2006 - 04:42 PM
#15 _torana_
#16 _Leakey_
Posted 15 May 2006 - 05:15 PM
that thing J Lenno drives from the Blastolene Bros.
do you reckon two sbc's ? or completely custom. Apparently there are (2) of 'em,
one in the '23 Ford T-Bucket above and another in a '37 Ford Coupe.
I prefer the Blastolene special!
- Leakey
#17
Posted 15 May 2006 - 05:17 PM
#18
Posted 15 May 2006 - 06:43 PM
The moment I saw it I thought it was two Smallblocks. Whether it is actually two smallblocks that have been stuck together or a full custom block made I'm not sure, but it's definately based on the SBC block.do you reckon two sbc's ? or completely custom.
#19 _Azza_
Posted 15 May 2006 - 07:42 PM
#20
Posted 15 May 2006 - 08:00 PM
Machine them back to the bare minimum, and chemically heat up the contact surfaces evenly, and slide them together on a lathe bed kinda thing.
Then you can line-hone them on the same setup.
#21
Posted 15 May 2006 - 08:38 PM
Grant..
#22 _timbotorrie_
Posted 15 May 2006 - 08:43 PM
has to be two small block chevys!
#23 _CHOPPER_
Posted 15 May 2006 - 08:51 PM
#24
Posted 15 May 2006 - 10:01 PM
All depends on how much the owners wanted to throw away too I suppose. if you had the money, you could make it pull seven grand, but it would be a nightmare to fund it... just even the rocker covers would be expensive, not to mention the heads, manifolds, fark, distributor (off the shelf? ) etc.
#25
Posted 15 May 2006 - 10:20 PM
Edited by lakeside, 15 May 2006 - 10:20 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users