Recommend a Manual G/box Reconditioner
Started by
_Viper_
, May 09 2011 10:26 PM
5 replies to this topic
#1 _Viper_
Posted 09 May 2011 - 10:26 PM
Hey guys, I just picked up a Supra R154 G/box and done abit of research and have found that the first gear thrust washer is a common problem/weak link and should be replaced with a chromoly Item.
So just looking for a good workshop that could supply the required part and fit it, as well as give it a general check over internally and make sure everything is ok before I fit it to the car?
So just looking for a good workshop that could supply the required part and fit it, as well as give it a general check over internally and make sure everything is ok before I fit it to the car?
#2
Posted 09 May 2011 - 10:33 PM
There was talk of this mod on antilag
Go have a hunt there
I personally have a guy who does my Toyota boxes... he's Toyo trained and builds racecars for a living... but he's mine and I'm not giving his info out
Try Allen or Neil at S+G gearboxes in Cannington to check it over and fit
But you'll probably have to source the bits if they are specials
They build boxes... but not sure they do fancies
Go have a hunt there
I personally have a guy who does my Toyota boxes... he's Toyo trained and builds racecars for a living... but he's mine and I'm not giving his info out
Try Allen or Neil at S+G gearboxes in Cannington to check it over and fit
But you'll probably have to source the bits if they are specials
They build boxes... but not sure they do fancies
#3
Posted 09 May 2011 - 10:38 PM
I personally have a guy who does my Toyota boxes... he's Toyo trained and builds racecars for a living... but he's mine and I'm not giving his info out
Why not? (via PM)
#4
Posted 09 May 2011 - 10:39 PM
Cause he's too busy to take on anything else
So I won't push work to him when he's already got plenty to do
So I won't push work to him when he's already got plenty to do
#5
Posted 09 May 2011 - 10:42 PM
I guess I'll have to do it myself then? Mail it to me Viper.
#6 _Viper_
Posted 09 May 2011 - 10:50 PM
Ive found suppliers for the strengthened parts in the US, Is what all the forums seem to be recommending
http://www.marlincra...earch/node/r154
But cheers I'll try S+G. if ya change ya mind about ya fav dude feel free to pm me it shouldnt take him long to do mine
Heh Too heavy to pop in the letter box Rodomo, And I somehow get the feeling ud like to keep it for yaself haha
http://www.marlincra...earch/node/r154
But cheers I'll try S+G. if ya change ya mind about ya fav dude feel free to pm me it shouldnt take him long to do mine
Heh Too heavy to pop in the letter box Rodomo, And I somehow get the feeling ud like to keep it for yaself haha
Edited by Viper, 09 May 2011 - 10:50 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users