Here's the thing, i'me putting the 304 into a lh5000, & the price of a new set of pacemakers is around $700. I have a set of pacemakers from the old 308 which were only a week old when the car was written off. Can i simply cut off the old mount plates, reposition the middle pipes, & put a oxygen sensor boss into the left bank pipe, & weld it all together? I am a certified welder so there is no problem there.
304 into lh extractors
Started by
Statler
, May 20 2006 12:18 PM
2 replies to this topic
#1
Statler
-
- Administrators
-
- 6,282 posts
Heckler Extraordinaire
- Name:Col
- Location:Mackay Qld. Whitsundays for all you back packers!
- Joined: 20-May 06
Posted 20 May 2006 - 12:18 PM
#2
_CHOPPER_
_CHOPPER_
-
- Guests
Posted 20 May 2006 - 12:24 PM
Firstly, welcome to the forums. Secondly, if you can weld you can make them fit. I won't suggest ways to go about it, you're the welder not me.
#3
_Oldn64_
_Oldn64_
-
- Guests
Posted 23 May 2006 - 12:24 AM
I am gathering that the 304 is an efi motor and thus the reason for the oxygen sensor. You will also be upset to find out that the efi heads run a different port for the exhaust and the inlet thus requiring a change of extractors. IE your existing extractors for you 308 will not fit. Your best bet would be to try and use the original exhuast off the written off vehicle and modify it. If that ends up being too much then just buy teh pre done set as this will save you a huge amount of time. it also means that minimum wleding will need to be doen in akward positions.
cheers
cheers
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
