Can anyone please remind me of the float level height for a quadrajet. I have'nt done one in years, and the books I have to tell me are 400km's away!!
I remember how to, just not how much!
Thanks in advance.
Dave
URGENT! Float level in Rochester Quadrajet
Started by
355LX
, May 20 2006 06:17 PM
4 replies to this topic
#1
355LX
-
- Members
-
- 611 posts
Long Term Project
- Name:Dave
- Location:Perth, WA
- Car:LX hatch
- Joined: 08-November 05
Posted 20 May 2006 - 06:17 PM
#2
_sstorana_
_sstorana_
-
- Guests
Posted 20 May 2006 - 07:45 PM
Float Level as per the
Carburettors - Service Manual Supplement" - M37391 is
6.61mm (.260 in.)
hope that's what you needed
cheers
Mick
Carburettors - Service Manual Supplement" - M37391 is
6.61mm (.260 in.)
hope that's what you needed
cheers
Mick
#3
_Yella SLuR_
_Yella SLuR_
-
- Guests
Posted 22 May 2006 - 12:35 PM
Where is that measured from, the bottom of the bowl, or between the top of the float and the bowl lid? Just curious.
#4
makka
-
- Members
-
- 3,559 posts
A m��se once bit my sister
- Name:Cohen
- Location:ya daughters place
- Joined: 08-November 05
Posted 22 May 2006 - 01:00 PM
from the top I think Pat
#5
_sstorana_
_sstorana_
-
- Guests
Posted 22 May 2006 - 05:46 PM
Pat
from the book...
"6.6mm (.260") from top pf casting to top of float at toe (means end), gasket removed
cheers
Mick
from the book...
"6.6mm (.260") from top pf casting to top of float at toe (means end), gasket removed
cheers
Mick
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
