Recommend someone for a Headjob?
#1 _Viper_
Posted 21 July 2011 - 10:13 PM
Trying to decide on exhaust valve size and find a supplier... Standard is 44in and 37.5 Ex.... I found a source for 44in and 40ex in stainless.. but dont see the point of increasing the exhaust without the intake??
#2
Posted 21 July 2011 - 10:22 PM
Or Luigi Coombes (Luigi's heads)
If you want the best and willing to pay for it those 2 are your guys
#3 _Viper_
Posted 21 July 2011 - 10:45 PM
Luigi's Head Shop
Motor Engineers & Repairers - Bayswater, WA
50 Irvine St, Bayswater WA 6053, Australia (08) 9272 5424
??
#4
Posted 21 July 2011 - 11:32 PM
Gower is out in Northam or somewhere now
Flow Tested Cylinder Heads I think he's called nowdays
#5 _wombat_
Posted 21 July 2011 - 11:34 PM
i think there is a Harris engines in ossie park that do all sorts of heads,
quatermanes use them on there turbo thing at the drags.
#6
Posted 22 July 2011 - 12:07 AM
#7
Posted 22 July 2011 - 12:17 AM
Try to find Greg Gower (H.I.T)
Or Luigi Coombes (Luigi's heads)
If you want the best and willing to pay for it those 2 are your guys
#8 _Quagmire_
Posted 22 July 2011 - 12:16 PM
OH sorry you were enquiring about that sorta headjob, As I was in some public toilets the other day and there was quite a few names wrote upon the walls there and not one of the above mentioned But then again Bomber knows more about the public toilet one's than most so whichever way you need to roll
hyde park highgate ....around 9pm on any friday or saturday nite ...should see you right ....ask for candy
can't help on the other type.....sorry
as i think andies suggestion ^ might be a bit far to travel
Edited by Quagmire, 22 July 2011 - 12:17 PM.
#9 _355 EH_
Posted 01 August 2011 - 10:13 PM
give him a yell on 0439 286 396
#10 _Viper_
Posted 01 August 2011 - 10:27 PM
Actually were you the guy at the workshop in Armadale? Boz race engines rings a bell now... I was the guy that came in lookin for Sean and then I went off to Malaga.
#11 _sshatch355_
Posted 01 August 2011 - 11:13 PM
the man for the job is sean at CHT (cylinder head technology) malaga perth, he is one the best in oz. he does all my head work. he is the only guy i know who gets well over 600+hp flow out of iron VN heads. and is equally good on 4 and 6 cyl heads also. tell him paul from Boz-Race Engines sent you.
give him a yell on 0439 286 396
+1 happy with everything sean has done for me over the years
#12 _355 EH_
Posted 04 August 2011 - 01:51 AM
#13 _mumbo_
Posted 04 August 2011 - 10:06 AM
Is that Sean as in Allports ?ha lol yes that was me. its all good then.
#14 _sshatch355_
Posted 04 August 2011 - 10:34 AM
Is that Sean as in Allports ?
ha lol yes that was me. its all good then.
yeah kev
#15 _Viper_
Posted 04 August 2011 - 11:37 AM
#16 _mumbo_
Posted 04 August 2011 - 03:29 PM
#17 _sshatch355_
Posted 04 August 2011 - 03:46 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users