I just can't remember, and I should. Can anyone recomend any place to get replacement carpets from? I want compare the prices to RSP.
Car carpets
Started by
_Swampy_
, May 27 2006 05:23 PM
8 replies to this topic
#1 _Swampy_
Posted 27 May 2006 - 05:23 PM
#2 _Oldn64_
Posted 28 May 2006 - 01:40 PM
Tru-fit in dandy do complete carpet for about $120 from memory. you will need underlay, but your original underlay maybe ok. Just need to look at the felt underneath and go from there. The other place is Knox Carpet.
Cheers
Cheers
#3 _Swampy_
Posted 28 May 2006 - 07:48 PM
Tru-fit have this underlay with Bitumen on to help absorb engine noise. Does anyone know if this is worth it? Or the under bonnet noise absorption pads?
#4 _Flamenco_
Posted 29 May 2006 - 01:23 AM
I've used both places a few times and... for me, my choice would be 'Knox auto Carpet' Swampy. They have the underlay there too.
Edited by Flamenco, 29 May 2006 - 01:25 AM.
#5 _kaz from adelaide_
Posted 29 May 2006 - 05:03 AM
Tru Fit r cheap, but after sales r shocking. I personally wouldn't use them again.
#6
Posted 29 May 2006 - 08:28 AM
i would recomend..Knox carpets.....or Queensland Moulded Car carpets...
either 1 of them are very very good.
either 1 of them are very very good.
#7 _moot_
Posted 29 May 2006 - 10:07 AM
knox are probably the best. i use them weekly.
#8
Posted 29 May 2006 - 02:59 PM
Kaz, maybe they couldn't stop laughing????Tru Fit r cheap, but after sales r shocking. I personally wouldn't use them again.
C'mon, you'll have to tell me what happened eventually
#9 _Keithy's_UC_
Posted 02 June 2006 - 01:52 PM
Not a fan of Tru-fit either - go for Knox as i havent heard a bad word about their products EVER!!
I've got tru-fit carpets in the UC, looks great but does not sit flat, was not aligned properly (steering cutout was too far to the left) and as a result, its sorta warped...
Keith
I've got tru-fit carpets in the UC, looks great but does not sit flat, was not aligned properly (steering cutout was too far to the left) and as a result, its sorta warped...
Keith
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users