Bumper over riders.
Started by
_swifty_
, Jan 15 2012 10:24 AM
7 replies to this topic
#1 _swifty_
Posted 15 January 2012 - 10:24 AM
I have seen a fitting instruction page on over riders with measurements. I can't find it on here with the search ,does anyone have the gap spacing measurement ?
#2
Posted 15 January 2012 - 10:41 AM
hope this helps
Attached Files
#3
Posted 16 January 2012 - 10:51 PM
Ive always wondered if one of these existed.
One thing though, the resulotion of the photo is a little low and I cant make out the numbers.
One thing though, the resulotion of the photo is a little low and I cant make out the numbers.
#4
Posted 16 January 2012 - 11:05 PM
Aaahhh so they are actually guards, not overriders hey?
#5
Posted 17 January 2012 - 09:47 AM
Looks like they are equidisitant from the centreline of the vehicle 9" apart
#6 _torbirdie_
Posted 27 January 2012 - 11:14 PM
for those looking to purchase these, do appreciate the back ones and the fronts are not the same, the fronts come in a left and right to match the curve of the bumper, basically they will only fit in one spot where they will point straight ahead.
#7 _Torza_
Posted 29 January 2012 - 08:30 AM
i would love to get a set anyone know if you can still get them new or reproduced?
#8
Posted 08 December 2020 - 10:42 AM
old post but the fitting instructions came in handy !!!
FYI I just bought a set from rares spares yesterday and look great. 7/12/2020
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users