just after a design or measurments of a standard gearbox crossmember for an lc torana.
aussie 4 speed crossmember (standard)
Started by
_toranatime_
, Mar 01 2012 09:20 PM
2 replies to this topic
#1 _toranatime_
Posted 01 March 2012 - 09:20 PM
#2 _Mike73_
Posted 05 March 2012 - 06:30 PM
I would suggest you use the LJ design as the later ones were stronger, the LH, LX and UC ones were similar too and sme had the croxmember partly boxed in.
V8 cross members are different if a Turbo 350 is used.
Mike
V8 cross members are different if a Turbo 350 is used.
Mike
#3 _toranatime_
Posted 07 March 2012 - 03:37 PM
thanks for the reply.. i've been having trouble finding an original crossmember. so i thought i would just get a design and make one but i can't seem to find a design either lol thanks for the advice on the lj crossmember.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users