Jump to content


LJ GTR Door Trim Badges

Started by _Lockstock1977_ , Jun 30 2012 09:32 AM
Interior LJ GTR GTR Door Trim LJ GTR Badge GTR Door Badge

  • Please log in to reply
4 replies to this topic

#1 _Lockstock1977_

_Lockstock1977_
  • Guests

Posted 30 June 2012 - 09:32 AM

Hi GMH Torana Forum Users,

I have been a long time watcher of this forum however this is my first post. I hope that someone will be able to answer my pressing question! I am currently restoring a 1972 LJ GTR (Salamanca Red). When I purchased the car it came minus the two GTR door trim badges. I have recently purchased two new badges courtesy of Rare Spares however, when fitted to the door I have discovered that the pins are too long as the door card now protrudes where the pins butt up against the inside door shell. I have purchased what are supposed to be the correct badges as they are the ones with the two shorter pins. Using images online, I have positioned the badges similar to where other owners have placed theirs. Is it a matter of cutting the excess length off the pins to enable them to fit or am I doing something wrong?

Any assistance would be greatly appreciated.

Cheers

Peter

#2 _Nitter_

_Nitter_
  • Guests

Posted 30 June 2012 - 10:33 AM

Original badges have a small washer then the ends of the pins are punched or flattened over so that not much protrudes. I countersunk the back of the door trim and araldited the pins...it worked!

#3 Bazza

Bazza

    ǝɹnʇxıɟ ɯnɹoɟ

  • Members
  • PipPipPipPipPipPipPip
  • 4,294 posts
  • Location:Outer Melb West Vic
  • Car:ɐuɐɹoʇ
  • Joined: 11-November 05

Posted 30 June 2012 - 11:01 AM

Hi

There are 3 GTR badge part numbers in the LJ Torana NASCO parts catalogue. If Rares only produces one type - then I guess there has to be a compromise.

Cheers

Bazza

#4 _Lockstock1977_

_Lockstock1977_
  • Guests

Posted 01 July 2012 - 11:01 AM

Thank you Nitter and Bazza for your responses. I sussed it out. I ended up fixing the back with the smaller flat retaining nut then cut the excess with a hack saw. I'm very happy with resultant finish! I will upload photos tonight.

#5 _Lockstock1977_

_Lockstock1977_
  • Guests

Posted 01 July 2012 - 04:24 PM

As promised I have included a photo of the drivers side door trim with new badges.

Attached Files


Back to Interior



Also tagged with one or more of these keywords: Interior, LJ GTR, GTR Door Trim, LJ GTR Badge, GTR Door Badge

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. GMH-Torana
  2. → Holden Tech
  3. → Interior
  4. Privacy Policy
  5. The Rules! ·