hey guys i cant get full lock on my lc. in the car park if you turn the wheel full lock it just scrubs the tyres out!! why does it do this? would it be becuase the off set on the wheels is to far out or something as they seem to be pretty far out they must be off a hr or something becuase they are 13 x 7 and i cant even fit 205 tyres under the gaurds whilst the guys in the club can get 215's well inside the guards....
under steering...
Started by
_uglybob_
, Jun 09 2006 07:53 PM
7 replies to this topic
#1 _uglybob_
Posted 09 June 2006 - 07:53 PM
#2 _Oldn64_
Posted 10 June 2006 - 02:28 AM
It would suggest that both teh offset of teh rims maybe wrong and or the front is highly modified. It is quite common for the LC/J to scrub anyway as the whole idea of having teh steering rack infront of the wheels just makes the steering geometry all screwy.
Do you have a piccy?
Cheers
Do you have a piccy?
Cheers
#3 _uglybob_
Posted 10 June 2006 - 02:15 PM
oh ok then no worries. theres nothing moddified to the front end but ill take a foti now if you want. is there anything u can do to over come the scrubing out?
#4
Posted 10 June 2006 - 03:30 PM
The problem is incorrect "toe-out on turns" an inbuilt fault from the factory. It is the angle of the steering arm to the stub and there is no adjustment.
#5 _uglybob_
Posted 10 June 2006 - 04:52 PM
well i guess ill get over it then. cheers for that. so if i cant stop it from scrubing out can i improve the issue?
#6
Posted 11 June 2006 - 01:17 AM
Get a wheel alignment to make sure it doesn't have a bent steering arm. If that is OK, tell them to set the toe-in to its minimum value.
#7 _Yella SLuR_
Posted 11 June 2006 - 10:00 AM
Lowered springs will also exacerbate the problem. I just accept that sooner or later the outer part of the tyre is going to scrub out.
#8 _uglybob_
Posted 11 June 2006 - 11:46 AM
ok then cheers guys ill get that wheel alignment done with minimum toe in. but i guess ill get over it soon enough.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users